Bang & Olufsen 4921 / Bang & Olufsen 4922 / Bang & Olufsen 4923 / Bang & Olufsen 4924 / Bang & Olufsen 4925 / Bang & Olufsen 4926 / Bang & Olufsen 4927
The main features of the Bang & Olufsen Beocord 5000 II cassette deck are: 2 heads, digital tape counter with 4 digits, tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Bang & Olufsen Beocord 5000 II cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Bang & Olufsen Beocord 5000 II let it respond to the slightest finger contact for fast and effortless transport function selection.
Dolby C-type used in the Bang & Olufsen Beocord 5000 II provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original.
Digital Peak-Reading Meters
4-Digıt Digital Counter
Record Protection
Silver Finish
Orientation Center
Front Loading
Stereo
2 Head Desiǥn
4 Track / 2 Channel
Dolby-B Noise Reduction
Dolby-C Noise Reduction
Dolby HX Pro®
Full Logic Transport Control
Alternating Current
1⅞ ips - 4.76 cm/s
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Sìngle Capsŧan Transport
Belt Drive (Capsŧan)
Mechanical Tape Loading
Auto Stop
Notice on copying anything
Copying Bang & Olufsen Beocord 5000 II information from this site and use it in your auction or on your website is not allowed. A link to this page for Bang & Olufsen Beocord 5000 II is allowed from your website or auction.