The main features of the Denon DR-M24HX cassette deck are: 3 heads and off-tape monitoring, digital tape counter with 4 digits, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven dual-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Denon DR-M24HX cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Denon DR-M24HX let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.
Dolby C-type used in the Denon DR-M24HX provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The three-head configuration of the Denon DR-M24HX requires a Double Dolby system, one for recording and one for playback. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the DR-M24HX filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
Manual Bias Calibration
Manual Level Calibration
RCA Input/Output Connectors
Headphones
Digital Peak-Reading Meters
4-Digıt Digital Counter
Record Protection
Silver Finish
Orientation Left
Black Finish
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Dolby-B Noise Reduction
MPX Filter
Double Dolby NR Circuits
Dolby-C Noise Reduction
Dolby HX Pro®
Full Logic Transport Control
Record Mute
Real-Time Tape Monitoring
Alternating Current
Record Level Balance Control
Output-Level Control
Master Record Level Control
1⅞ ips - 4.76 cm/s
Automatic Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Mechanical Tape Loading
Dual-Capsŧan Transport
3x Motor Mechanism
Belt Drive (Capsŧan)
Belt Drive (Mechanism)
Notice on copying anything
Copying Denon DR-M24HX information from this site and use it in your auction or on your website is not allowed. A link to this page for Denon DR-M24HX is allowed from your website or auction.