The main features of the Harman Kardon CD491 cassette deck are: 3 heads and off-tape monitoring, analog 3 digit tape counter and memory stop, manual tape type selection with support for normal, chrome and metal tapes, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Harman Kardon CD491 cassette deck are generic digital peak reading meters with multi-color indication to provide visual saturation level of tape and peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the Harman Kardon CD491 let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, sensitivity, to optimum levels can be performed prior to recording.
Dolby C-type used in the Harman Kardon CD491 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. To further maintain recording accuracy, the CD491 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the CD491 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
Manual Level Calibration
Bias Fine Tune
2 Mono Microphone Inputs
RCA Input/Output Connectors
Headphones
3-Digıt Mechanical Counter
Digital Peak-Reading Meters
Linear Tape Counter
Peak Hold
Multi Color Peak-Reading Meters
Remaining Time
Record Protection
Silver Finish
Orientation Left
Black Finish
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Dolby-B Noise Reduction
MPX Filter
Dolby-C Noise Reduction
Dolby HX Pro®
Music Scan
Full Logic Transport Control
Memory Repeat
Timer Recording/Playback
Record Mute
Memory Stop
Auto-Space
Real-Time Tape Monitoring
Alternating Current
Microphone Level Adjust (Left/Right)
Individual Input Level Controls
Output-Level Control
Master Record Level Control
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Direct Drive (Capsŧan)
Mechanical Tape Loading
Dual-Capsŧan Transport
Notice on copying anything
Copying Harman Kardon CD491 information from this site and use it in your auction or on your website is not allowed. A link to this page for Harman Kardon CD491 is allowed from your website or auction.