The main features of the Tandberg TCD 340 A cassette deck are: 3 heads and no off-tape monitoring to save production cost, mechanical 3 digit tape counter, manual tape type selection and capable of handling normal and chrome tapes.
Typical front loading cassette deck with the cassette compartiment located on the right side of the deck. Tape eject is operated mechanically and the cassette needs to be placed sideways in the cassette well.
Level meters used on the Tandberg TCD 340 A cassette deck are analog needle VU reading meters. Full-logic transport controls used on the Tandberg TCD 340 A let it respond to the slightest finger contact for fast and effortless transport function selection.
Record azimuth correction.
The Dolby-B system reduces tape hiss on tapes recorded on the Tandberg TCD 340 A by as much as 10 dB at the highest frequencies.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
Manual Azimuth Calibration
2 Mono Microphone Inputs
AC Power Cord / Plug
RCA Input/Output Connectors
Headphones
3-Digıt Mechanical Counter
Analog Needle Meters
Silver Finish
Orientation Right
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Dolby-B Noise Reduction
Full Logic Transport Control
Alternating Current
1⅞ ips - 4.76 cm/s
Normal Tape Capabilıty
Manual Tape Type Selection
Chrome Tape Capabilıty
Sideways Tape Transport
Belt Drive (Capsŧan)
Mechanical Tape Loading
Auto Stop
Notice on copying anything
Copying Tandberg TCD 340 A information from this site and use it in your auction or on your website is not allowed. A link to this page for Tandberg TCD 340 A is allowed from your website or auction.