The main features of the Technics RS-B965 cassette deck are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Technics RS-B965 cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Technics RS-B965 let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.
Dolby C-type used in the Technics RS-B965 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The three-head configuration of the Technics RS-B965 requires a Double Dolby system, one for recording and one for playback. Dbx Type II found in the RS-B965 is a simplified version of the Type I noise reduction system. The dbx Type II system was designed to be used with systems with limited bandwidth such as cassette based recorders and also uses a simple 2:1:2 compander to reduce noise. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-B965 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.
Manual Bias Calibration
400Hz Test Tone
10kHz Test Tone
Manual Level Calibration
Bias Fine Tune
CD Direct Input
RCA Input/Output Connectors
Headphones
Wireless Remote Control Receiver
Linear Tape Counter
Digital Peak-Reading Meters
4-Digıt Digital Counter
Record Protection
Orientation Left
Champagne Finish
Black Finish
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Dolby-B Noise Reduction
Double Dolby NR Circuits
Dolby-C Noise Reduction
Dolby HX Pro®
MPX Filter
DBX Type II Noise Reduction
Full Logic Transport Control
Real-Time Tape Monitoring
Music Scan
Memory Repeat
Timer Recording/Playback
Record Mute
Memory Stop
Auto-Space
Alternating Current
Master Record Level Control
Record Level Balance Control
Auto Record Level
Headphone Volume Control
Cassette Stabilizer
Gold Plated Input/Output Jacks
Gold-Plated Headphone Jack
1⅞ ips - 4.76 cm/s
Automatic Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Motorized Tape Loading
Quartz Controlled Transport
Auto Shutoff
Direct Drive (Capsŧan)
Dual-Capsŧan Transport
Notice on copying anything
Copying Technics RS-B965 information from this site and use it in your auction or on your website is not allowed. A link to this page for Technics RS-B965 is allowed from your website or auction.