The main features of the Toshiba PC-G50R cassette deck are: 2 heads, analog 3 digit tape counter, automatic tape type selection with support for normal, chrome and metal tapes, belt driven auto reverse transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Toshiba PC-G50R cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Toshiba PC-G50R let it respond to the slightest finger contact for fast and effortless transport function selection.
Dolby C-type used in the Toshiba PC-G50R provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
2 Mono Microphone Inputs
AC Power Cord / Plug
RCA Input/Output Connectors
Headphones
3-Digıt Mechanical Counter
Digital Peak-Reading Meters
Silver Finish
Orientation Left
Front Loading
Stereo
2 Head Desiǥn
4 Track / 2 Channel
Dolby-B Noise Reduction
Dolby-C Noise Reduction
Full Logic Transport Control
Alternating Current
Record Level Balance Control
Master Record Level Control
1⅞ ips - 4.76 cm/s
Automatic Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Mechanical Tape Loading
Single Capsŧan Transport (x2)
Belt Drive (Capsŧan)
Notice on copying anything
Copying Toshiba PC-G50R information from this site and use it in your auction or on your website is not allowed. A link to this page for Toshiba PC-G50R is allowed from your website or auction.