The main features of the Aiwa AD-F80M cassette deck are: 3 heads and off-tape monitoring, analog 3 digit tape counter and memory stop, manual tape type selection with support for normal, chrome, ferro-chrome and metal tapes, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Aiwa AD-F80M cassette deck are analog needle VU reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the Aiwa AD-F80M let it respond to the slightest finger contact for fast and effortless transport function selection. Cue and review can be used to easily and quickly locate the beginning of a passage.
To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.
The Dolby-B system reduces tape hiss on tapes recorded on the Aiwa AD-F80M by as much as 10 dB at the highest frequencies. To further maintain recording accuracy, the AD-F80M incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the AD-F80M can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
Manual Bias Calibration
Manual Level Calibration
2 Mono Microphone Inputs
RCA Input/Output Connectors
Headphones
Front Input Connector
Wired Remote Input/Output Ports
3-Digıt Mechanical Counter
Peak Hold
Meters Peak / VU Switchable
Analog Needle Meters
Normal Frequency Bias Oscillator
Silver Finish
Orientation Left
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Cassette Back Lighting
Dolby-B Noise Reduction
MPX Filter
Full Logic Transport Control
Memory Repeat
Cue / Review
Timer Recording/Playback
Record Mute
Memory Stop
Real-Time Tape Monitoring
Alternating Current
Microphone Level Adjust (Left/Right)
Individual Input Level Controls
Output-Level Control
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Ferro-Chrome Tape Capabilıty
3-Position Equalization Selector
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
2x Motor Mechanism
Auto Shutoff
Mechanical Tape Loading
Sìngle Capsŧan Transport
Belt Drive (Capsŧan)
Notice on copying anything
Copying Aiwa AD-F80M information from this site and use it in your auction or on your website is not allowed. A link to this page for Aiwa AD-F80M is allowed from your website or auction.