Aiwa F600
Dolby B NR Wired Remote Control Full Logic Metal Tape 3 Head

The Aiwa AD-F600 is a stereo cassette deck with double Dolby B noise reduction, it was introduced by Aiwa in 1980.

The main features of the Aiwa AD-F600 cassette deck are: 3 heads and off-tape monitoring, analog 3 digit tape counter, manual tape type selection with support for normal, chrome and metal tapes, belt driven dual-capstan transport.

Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.

Level meters used on the Aiwa AD-F600 cassette deck are analog needle VU reading meters. Full-logic transport controls used on the Aiwa AD-F600 let it respond to the slightest finger contact for fast and effortless transport function selection.

The Dolby-B system reduces tape hiss on tapes recorded on the Aiwa AD-F600 by as much as 10 dB at the highest frequencies. The three-head configuration of the Aiwa AD-F600 requires a Double Dolby system, one for recording and one for playback. To further maintain recording accuracy, the AD-F600 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the AD-F600 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.

To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.

Compact Cassette
  • Dual Motor
  • 3 Head
  • DX Combination Head
  • Full Logic Control
  • Craftmanship
  • ADMS (Automatic Demagnetizing System)
  • Metal

Historic events

1980 Dolby C Noise Reduction introduced by Dolby Laboratories.

Features of Aiwa AD-F600

Calibration
Calibration
Bias Fine Tune
Connectors
Connectivity
2 Mono Microphone Inputs AC Power Cord / Plug RCA Input/Output Connectors Headphones Wired Remote Control
Display
Display
3-Digıt Mechanical Counter Analog Needle Meters
Cassette Exterior
Exterior
Silver Finish Orientation Left Front Loading
Compact Cassette
General
Stereo
Head Configuration
Head Configuration
Demagnetizing (Auto) 3 Head Desiǥn 4 Track / 2 Channel
Indicators
Indicators
Peak Level Indicators
Noise Resuction
Noise Reduction
Dolby-B Noise Reduction Double Dolby NR Circuits MPX Filter
Controls
Operation
Full Logic Transport Control Timer Recording/Playback Real-Time Tape Monitoring
Power
Power Requirements
Alternating Current
Preamplifier
Preamplifier
Individual Input Level Controls Output-Level Control
Tape Speed
Speed
1⅞ ips - 4.76 cm/s
Tape
Tape
Manual Tape Type Selection Normal Tape Capabilıty Chrome Tape Capabilıty Metal Tape Capabilıty
Transport
Transport
Auto Shutoff Mechanical Tape Loading Dual-Capsŧan Transport Belt Drive (Capsŧan)

Similar to Aiwa AD-F600 from the period 1980