The main features of the Alpage AL-80 cassette deck are: 2 heads, digital linear tape counter with 4 digits, manual tape type selection and capable of handling normal, chrome, ferro-chrome and metal tapes, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Alpage AL-80 cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Alpage AL-80 let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, sensitivity, to optimum levels can be performed prior to recording.
Dolby C-type used in the Alpage AL-80 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The three-head configuration of the Alpage AL-80 requires a Double Dolby system, one for recording and one for playback. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the AL-80 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
Manual Level Calibration
Bias Fine Tune
2 Mono Microphone Inputs
RCA Input/Output Connectors
Headphones
Wired Remote Control
Digital Peak-Reading Meters
Linear Tape Counter
4-Digıt Digital Counter
Record Protection
Silver Finish
Orientation Left
19-Inch EIA Rack Mounting
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
2 Head Desiǥn
Cassette Back Lighting
Dolby-B Noise Reduction
MPX Filter
Double Dolby NR Circuits
Dolby-C Noise Reduction
Full Logic Transport Control
Record Mute
Real-Time Tape Monitoring
Alternating Current
Individual Input Level Controls
Output-Level Control
Headphone Volume Control
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Ferro-Chrome Tape Capabilıty
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Mechanical Tape Loading
Sìngle Capsŧan Transport
Belt Drive (Capsŧan)
Notice on copying anything
Copying Alpage AL-80 information from this site and use it in your auction or on your website is not allowed. A link to this page for Alpage AL-80 is allowed from your website or auction.