The main features of the JVC TD-V1050 cassette deck are: 3 heads and off-tape monitoring, digital tape counter with 3 digits, automatic tape type selection and capable of handling normal, chrome and metal tapes, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the JVC TD-V1050 cassette deck are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the JVC TD-V1050 let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.
Dolby C-type used in the JVC TD-V1050 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the TD-V1050 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.
Manual Bias Calibration
Manual Level Calibration
AC Power Cord / Plug
RCA Input/Output Connectors
Headphones
CD Direct Input
Wireless Remote Control Receiver
3-Digıt Digital Counter
Digital Peak-Reading Meters
Elapsed Time
Peak Hold
Remaining Time
Display On/Off
Oxygen-Free-Copper Wiring
Oxygen-Free-Copper PC-Board Traces
Record Protection
High Frequency Bias Oscillator
Silver Finish
Orientation Left
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Cassette Back Lighting
Dolby-B Noise Reduction
MPX Filter
Dolby-C Noise Reduction
Dolby HX Pro®
Music Scan
Full Logic Transport Control
Real-Time Tape Monitoring
Alternating Current
Record Level Balance Control
Master Record Level Control
Headphone Volume Control
Cassette Stabilizer
Gold Plated Input/Output Jacks
Gold-Plated Headphone Jack
1⅞ ips - 4.76 cm/s
Automatic Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Motorized Tape Loading
Auto Shutoff
Direct Drive (Capsŧan)
Dual-Capsŧan Transport
Notice on copying anything
Copying JVC TD-V1050 information from this site and use it in your auction or on your website is not allowed. A link to this page for JVC TD-V1050 is allowed from your website or auction.