The main features of the Kenwood KX-1100G cassette deck are: 3 heads and off-tape monitoring, digital tape counter with 4 digits, automatic tape type selection and capable of handling normal, chrome and metal tapes, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Kenwood KX-1100G cassette deck are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the Kenwood KX-1100G let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.
Dolby C-type used in the Kenwood KX-1100G provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The three-head configuration of the Kenwood KX-1100G requires a Double Dolby system, one for recording and one for playback. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the KX-1100G filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
400Hz Test Tone
10kHz Test Tone
Manual Bias Calibration
Manual Level Calibration
2 Mono Microphone Inputs
RCA Input/Output Connectors
Headphones
Digital Peak-Reading Meters
Peak Hold
4-Digıt Digital Counter
Record Protection
Orientation Left
Black Finish
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Dolby C
Play
Dolby B
Metal Tape
Chrome Tape
Normal Tape
Dolby-B Noise Reduction
MPX Filter
Double Dolby NR Circuits
Dolby-C Noise Reduction
Full Logic Transport Control
Timer Recording/Playback
Real-Time Tape Monitoring
Auto Record Pause
Alternating Current
Individual Input Level Controls
Master Record Level Control
Headphone Volume Control
Gold Plated Input/Output Jacks
1⅞ ips - 4.76 cm/s
Automatic Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Direct Drive (Capsŧan)
Mechanical Tape Loading
Dual-Capsŧan Transport
Sìngle Capsŧan Transport
Notice on copying anything
Copying Kenwood KX-1100G information from this site and use it in your auction or on your website is not allowed. A link to this page for Kenwood KX-1100G is allowed from your website or auction.