The main features of the Technics RS-M280 cassette deck are: 3 heads and off-tape monitoring, digital tape counter with 3 digits and memory stop, manual tape type selection and capable of handling normal, chrome, ferro-chrome and metal tapes with automatic equalization selection, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Technics RS-M280 cassette deck are generic digital peak reading meters with multi-color indication to provide visual saturation level of tape, peak hold for easy adjustment of optimum recording level and peak indicator for easy adjustment of optimum recording level. Full-logic transport controls used on the Technics RS-M280 let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, sensitivity, to optimum levels can be performed prior to recording.
The Dolby-B system reduces tape hiss on tapes recorded on the Technics RS-M280 by as much as 10 dB at the highest frequencies. The three-head configuration of the Technics RS-M280 requires a Double Dolby system, one for recording and one for playback.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
400Hz Test Tone
Manual Level Calibration
Bias Fine Tune
8kHz Test Tone
2 Mono Microphone Inputs
Wired Remote Control
RCA Input/Output Connectors
Headphones
Peak Hold
Multi Color Peak-Reading Meters
3-Digıt Digital Counter
Digital Peak-Reading Meters
Record Protection
Silver Finish
Orientation Left
Black Finish
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Peak Indicator
Dolby B
Metal Tape
Chrome Tape
Ferro-Chrome Tape
MPX
Normal Tape
Dolby-B Noise Reduction
Double Dolby NR Circuits
Full Logic Transport Control
Real-Time Tape Monitoring
Memory Repeat
Timer Recording/Playback
Record Mute
Memory Stop
Alternating Current
Individual Input Level Controls
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Automatic Tape Type Selection
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
Automatic Tape Equalization
Ferro-Chrome Tape Capabilıty
Solenoid Control (Mechanism)
Mechanical Tape Loading
3x Motor Mechanism
Auto Shutoff
Quartz Controlled Transport
Direct Drive (Capsŧan)
Dual-Capsŧan Transport
Notice on copying anything
Copying Technics RS-M280 information from this site and use it in your auction or on your website is not allowed. A link to this page for Technics RS-M280 is allowed from your website or auction.