Technics M95
The main features of the Technics RS-M95 cassette deck are: 3 heads and off-tape monitoring, digital tape counter with 3 digits and memory stop, manual tape type selection and capable of handling normal, chrome, ferro-chrome and metal tapes, single capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Technics RS-M95 cassette deck are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level and peak indicator for easy adjustment of optimum recording level. Full-logic transport controls used on the Technics RS-M95 let it respond to the slightest finger contact for fast and effortless transport function selection.
To ensure the best response from the wide variety of tapes available adjustment of, bias, to optimum levels can be performed prior to recording.
The Dolby-B system reduces tape hiss on tapes recorded on the Technics RS-M95 by as much as 10 dB at the highest frequencies. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-M95 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
400Hz Test Tone
Manual Bias Calibration
Bias Fine Tune
2 Mono Microphone Inputs
RCA Input/Output Connectors
Headphones
Wired Remote Control
3-Digıt Digital Counter
Digital Peak-Reading Meters
Peak Hold
Display Brightness Adjustable
Orientation Left
Black Finish
Front Loading
Stereo
3 Head Desiǥn
4 Track / 2 Channel
Record
Peak Indicator
Cassette Back Lighting
Dolby-B Noise Reduction
MPX Filter
Full Logic Transport Control
Timer Recording/Playback
Line / Mic Input Select
Record Mute
Memory Stop
Real-Time Tape Monitoring
Memory Play
Alternating Current
Individual Input Level Controls
Output-Level Control
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Ferro-Chrome Tape Capabilıty
Normal Tape Capabilıty
Chrome Tape Capabilıty
Metal Tape Capabilıty
2x Motor Mechanism
Tape Tension Control
Quartz Controlled Transport
Auto Shutoff
Direct Drive (Capsŧan)
Mechanical Tape Loading
Sìngle Capsŧan Transport
Notice on copying anything
Copying Technics RS-M95 information from this site and use it in your auction or on your website is not allowed. A link to this page for Technics RS-M95 is allowed from your website or auction.