The main features of the Telefunken STC 1 cassette deck are: 2 heads, analog 3 digit tape counter and memory stop, manual tape type selection with support for normal, chrome, ferro-chrome and metal tapes (automatic for normal and chrome tapes), belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Telefunken STC 1 cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Telefunken STC 1 let it respond to the slightest finger contact for fast and effortless transport function selection.
The Dolby-B system reduces tape hiss on tapes recorded on the Telefunken STC 1 by as much as 10 dB at the highest frequencies. The High Com system (as used in the Telefunken STC 1) works as a broadband 2:1:2 compander, achieving almost 15 dB of noise reduction for low and up to 20 dB for higher frequencies, while avoiding most of the acoustic problems observed with other high compression broadband companders. To further maintain recording accuracy, the STC 1 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the STC 1 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
To make live recordings this deck has 2 microphone inputs to connect a microphone with a DIN connector. For undisturbed listening a DIN connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
1 Stereo Microphone Input
Headphones
RCA Input/Output Connectors
DIN Input/Output Connector
Wired Remote Control
3-Digıt Mechanical Counter
Digital Peak-Reading Meters
Silver Finish
Orientation Left
19-Inch EIA Rack Mounting
Front Loading
Stereo
2 Head Desiǥn
4 Track / 2 Channel
Cassette Back Lighting
Dolby-B Noise Reduction
MPX Filter
High-Com Noise Reduction
Full Logic Transport Control
Memory Stop
Individual Input Level Controls
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Ferro-Chrome Tape Capabilıty
Automatic CrO2 Tape Selection
Normal Tape Capabilıty
Automatic Normal Tape Selection
Chrome Tape Capabilıty
Metal Tape Capabilıty
2x Motor Mechanism
Mechanical Tape Loading
Auto Stop
Sìngle Capsŧan Transport
Belt Drive (Capsŧan)
Notice on copying anything
Copying Telefunken STC 1 information from this site and use it in your auction or on your website is not allowed. A link to this page for Telefunken STC 1 is allowed from your website or auction.